Fixing orange peel, dry spots, runs, and overspray in the clear coat by wet sanding with 800 grit, and then applying another coat of color, followed by 2-3 coats of clear. #thisistheway #mandaloriancosplay #mandalorianarmor #starwars #3dprinting | Foxhead Workshop

Fixing a run found after applying Alumaluster and clear. Sand the run down with 800 grit to get the surface flat. Be sure to flatten the whole panel, or there will likely be edges and blemishes in the final coat. Sand only enough to get down to the first coat of clear, be careful not to sand through to the base coat. Once flat, move up to 1200, then 2000, and finish with 3000 before using buffing compound to shine the panel. once prepped, you can reapply the Alumaluster and seal it with 2k clear